IAI America XSEL-S - Manual (Page 111)

7. Error
T
reatment
105
7.2 Simple Calibration Execution Error for EZ-110XL
In this section, explains the details of error content and how to deal with if in the case when an error
number is displayed during the simple calibration.
A window as shown below would appear when an error is generated.
Click the “Calibration Processing Status Monitor” button on the top right of the Simple Calibration
Adjustment window.
The Calibration Processing Status Monitor window opens. Make the window show from No.1053 to
1055.
Calibration Processing Status Monitor window
Slide the screen downwards to show No.1053 to
1055.