IAI America XSEL-S - Manual (Page 14)

8
Precautions in Handling
x The number of work pieces that the camera can detect in 1 shot of image capturing is as
described below:
Cognex In-Sight EZ110 8 pieces at max.
Cognex In-Sight 5000 12 pieces at max.
Keyence CV-2000 7 pieces at max.
Vision systems of Keyence other than CV-2000 and I/F applicable vision systems 12 pieces at max.
OMRON vision systems 12 pieces at max.
x Build the system with care so that the work after being captured would not get moved off the
position by an external force (vibration, air blow, crash of another work, etc.).
x If the image-capturing conditions, such as the light (diffusers), focus, diaphragm, shutter speed,
etc., are inefficient, such problems like the work not being detected or inaccurate position
detection may occur. (Please refer to the Instruction Manual for Vision System to have the
appropriate adjustments.)
x Please ask each vision system supplier for the adjustment of Vision System (detection settings,
format settings indicated for our products [refer to Section 8.1], etc.).
When using Cognex In-Sight EZ110, the sample job data is available to download from the
enclosed CD or IAI homepage. (* Please ask the distributor to have the detection settings done
for you so it suits to the work that you will use.)
x Regarding Operation of High Speed Cartesian Robot CT4
Refer to 8.3 Operation of High Speed Cartesian Robot (CT4) for the details.