IDEC FS1A Controller - Manual (Page 49)

5-8
X16
X17
24V DC
When not using the start switch
（
Auto start）
X16
X17
24V DC
When not detecting the welding of start
switch
（
Manual start）
X16
X17
24V DC
When detecting the welding of start
switch
（
Control start）
S7
S7
X0
X1
T0
T1
X12
T12
X13
T13
When connecting multiple emergency stop switches in
series
X0
X1
T0
T1
X12
T12
X13
T13
When not using some inputs
NOTE: Applicable safety performance is dependnt on
each system configuration.
Note: In the case of using a spring lock type safety switch for the safety input of SafetyOne, if
the solenoid output of SafetyOne is connected to solenoid power terminal of the safety switch
directly, the start condition cannot be established due to the safety input stays in the OFF state.
In this case, connect the switch or other equipment to solenoid output of SafetyOne, and turn
off the operation of the solenoid for lock control.