IntelliTrack Inventory Shipping Receiving Picking (ISRP) - Manual (Page 27)

Quick Start Guide
21
CHAPTER 3
Batch Portable Setup
and Installation
If you elect to install the Batch Portable component, please consult this
chapter for CE Batch setup and CE Batch application installation on the
batch portable device.
Important: Make sure your batch portable device is a supported device.
For a complete list of supported devices, please refer to the hardware
matrix on our website:
www.intellitrack.net/hardwarematrix/hardwarema-
trix.aspx .
CE Batch Setup
CE Batch Setup and Installation involves Remote Data Access (RDA)
setup, ISRP Batch Portable Utility setup, and CE Batch portable applica-
tion installation.
CE Batch Setup Requirements
In order for successful workstation and batch portable communication,
make sure that your system meets these requirements:
1. For Windows XP Operating Systems: Your batch portable device and
your PC use Microsoft ActiveSync to communicate with each other.
Make sure your batch portable device is connected to the desktop com-
puter and that a partnership is established between the handheld device
and your computer.
Please note that Microsoft ActiveSync must be installed on the same
computer where the portable(s) will be connected, and it must be con-
figured to allow the portable handheld device to gain access to the net-
work. (Microsoft ActiveSync provides the conduit through which SQL
CE and SQL databases communicate.)
For more information about configuring Microsoft ActiveSync for net-
work communication, please refer to your ISRP online help, or your
online user manual.