IntelliTrack Inventory Shipping Receiving Picking (ISRP) User Manual
Page 58
IntelliTrack ISRP v7.1
52
•
Remove the IntelliTrack License Service from your system. First, close
your ISRP v7.x software applications both on the workstation and on
the handheld.
•
If you are re-installing it, use the Windows control panel to reach Add/
Remove Programs and remove the IntelliTrack ISRP, the IntelliTrack
License Client, and the IntelliTrack License Service. If you are moving
the service to a new server, uninstall any of the above ISRP compo-
nents (ISRP application, license client) that are installed there. Next,
use Windows Explorer to delete the directory where the previous ver-
sion was installed.
•
Use the ISRP software setup routine to re-install the ISRP application
along with the License Service. After the IntelliTrack License Service
is re-installed, you must re-register your ISRP software.
•
To re-register your ISRP software, you must re-load the license file into
the IntelliTrack License Service. You may either do this by using our
registration website (please refer to
“Using the IntelliTrack Registra-
tion Website to Register and Activate your ISRP Software” on page 49
or by calling IntelliTrack technical support (please refer to
elliTrack Technical Support to Register and Activate your ISRP Soft-
ware” on page 50
).
If the IntelliTrack License Service was moved to a new server, you
must run the License Service Client utility on each workstation that has
the ISRP workstation. The utility is found in the following location:
C:\Program Files\Common Files\IntelliTrack\Con-
figureLicenseServiceClient.exe. The utility is a command
line utility; it is run from a command prompt. It requires two parame-
ters: the host name or IP address of the new license server and the port
number, which defaults to 15313.
After you have completed these steps, restart the applications; they
should be pointing to the correct server now.