AT&T 8434 - Manual (Page 17)

The second line on each feature option screen shows the features you can access. To
use any of these features, you must press the softkey below the feature name. For
example, on the feature option screen shown on the previous page, you can leave a
message for another extension to call you back by pressing the softkey below LWC
(the Leave Word Calling feature). If you want to cancel the message, press the
softkey below CnLWC (the Cancel Leave Word Calling feature).
To see the next set of five features, press the display control button labeled [ Next ] ;
to move back a screen, press the display control button labeled [ Prev ] . Press
[ Next ] or [ Prev ] until the feature you want to use appears on the second line.
The following flowchart (Figure 3) shows the default features for the three feature
option screens. These are the 15 softkey features available when the voice terminal
(with display) is shipped from the factory. Also, see “Other Softkey Features That
May Be On Your Display” in this section.
LWC CnLWC Cnslt AutCB Timer
CFrwd CPark Excl TmDay PCall
Cancel
LWC
Automatic
Callback
Leave
Word
Calling
Prog Pause Spress Mark Wait
Consult Timer
Call Time/
Park Date
Call Manual Priority
Forwarding Exclusion Calling
AD
Pause
AD
Mark
Abbreviated AD
Dialing (AD) Suppress
Program
AD
Wait
Figure 3. The Three Default Feature Option Screens
Notes on the Default Features
An error tone (one beep) sounds when you have made a mistake in your softkey
entries.
Press [ Exit ] at any time to exit Softkey Mode and return to Normal (call-handling)
Mode.
12