AT&T 8434 - Manual (Page 23)

5
6
7
Dial list item (1, 2, 3... ) [dial tone]
Dial number you want to store (up to 24 digits)
Note: You may also be able to use the softkeys to
add special functions such as Pause, Mark, Suppress,
or Wait into the programmed telephone numbers.
If you are programming an outside number, be sure
to include a trunk code, if applicable.
Press [ # ] [confirmation tone]
•
•
Number is stored
Repeat Steps 5 through 7 if you want to program
8
additional items on the same list; press [ Drop ]
and begin again at Step 1 if you want to program
items on another list.
Hang up or press [ Drop ] to end programming
Note: Record your personal list items on the
Abbreviated Dialing list in the back of this guide;
group, system, and enhanced lists can be obtained
from your system manager.
To place a call using an
AD list button or code
1 Press [ Pers List ] or [ Grp List ] or [ Sys List ]
or Dial appropriate AD List code:
[ dial tone ]
•
•
•
List 1
List 2
List 3
Note: An [ Enhcd List ] may also be available; see your
system manager.
2 Dial desired list item (1, 2, 3...)
• Call is automatically dialed [ringback tone]
18