AT&T 8434 - Manual (Page 25)

Bridging/Manual Exclusion
You can access the Manual Exclusion feature with the softkeys only if the feature's
abbreviation, Excl, appears on the second line of one of the feature option screens.
To answer a bridged call 1 Press [ xxxxx ] of bridged call
Note: If your terminal has Ringing Appearance
Preference, this step is not necessary; you will
automatically be connected to the call when you lift
the handset.
2 Pick up handset or press [ Speaker ]
To use Manual Exclusion
to prevent other bridged
terminals from entering a
call (on a per call basis) 1 Press [ Menu ] and then press the softkey below Excl
while active on a call
or, if Excl is not available on your display,
press [
Excl xxxxx ] while connected to the call
Note: Pressing the softkey below Excl or pressing
[
Excl xxxxx ] again reactivates bridging.
Call Coverage/Consult
You can access the Consult feature with the softkeys only if the feature’s
abbreviation, Cnslt, appears on the second line of one of the feature option screens.
To answer a call for a
coworker for whom you
are a coverage point 1 Press [ xxxxx ] of incoming call when ringing begins
or green light flashes
Note: The call is not at your terminal until the
green light is flashing.
To leave a message for a
coworker to call the
original caller’s extension
1 Press [
Cvr CallBk ] while connected to the call
[confirmation tone]
Note: To leave a message for a coworker to call you,
press [
LWC ] instead.
20