AT&T 8434 - Manual (Page 46)

To see the number you
last dialed 1
2
Press [ Menu ] and then press the softkey below View
or, if View is not available on your display,
press [ Stored ]
Press the softkey below Last
or, if Last is not available on your display,
press [ LastDialed ]
or Dial Last Number dialed code
Time/Date
You can access this feature with the softkeys only if the feature’s abbreviation,
TmDay, appears on the second line of one of the feature option screens.
To see date and time 1 Press [ Menu ] and then press the softkey below
TmDay
or, if TmDay is not available on your display,
press [
Date/Time ]
• Display returns to Normal Mode after a few
seconds
Timer
You can access this feature with the softkeys only if the feature name, Timer,
appears on the second line of one of the feature option screens.
To see elapsed time
(hours, minutes, seconds) 1 Press [ Menu ] and then press the softkey below
Timer
or, if Timer is not available on your display,
press [
Timer ]
• Elapsed time is shown
2 To stop timer and clear display, press [ Menu ] and
then press the softkey below Timer again
or, if Timer is not available on your display,
press [
Timer ] again
• Elapsed time is displayed on the screen for about
four seconds and then disappears
41