AT&T 8434 - Manual (Page 34)

Priority Calling
You can access this feature with the softkeys only if the feature’s abbreviation,
PCall, appears on the second line of one of the feature option screens.
To place a priority call
(3-burst ring) 1 While on-hook or off-hook, press [ Menu ] and then
press the softkey below PCall
or, if PCall is not available on your display,
press [ Priority ] (while on-hook or off-hook)
or Dial Priority Calling access code
(while on-hook or off-hook)
[dial tone]
2 Dial the extension [ringback tone]
• Wait for called party to answer
Note: If your call is not answered and you wish to
redirect it to coverage, press [
Go to Cvr ] while call is
ringing.
To change a regular call
into a priority call (when
you hear a call waiting
ringback tone) 1
2
Press [ Menu ] and then press the softkey below PCall
or, if PCall is not available on your display,
press [
Priority ]
Wait for called party to answer
Note: If you still receive a call waiting
ringback tone, wait a few minutes and try again.
29