Normal (exit), Stored number – AT&T 8434 User Manual
Page 45
Normal (Exit)
✔
To exit any display
feature and return to
1
Press [
Exit
]
•
normal display
Display will show call information for active call
appearance
Stored Number
You can access this feature with the softkeys only if the feature’s abbreviation,
View, appears on the second line of one of the feature option screens.
To view a number stored
on an AD button
1
Press [
Menu
] and then press the softkey below View
or, if View is not available on your display,
press [
Stored
]
2
Press selected [
AD xxxxx
]
•
Stored number shown
3
To return to normal display, press [
Exit
]
or repeat Step 2 to see another stored number
To see the number stored
as a list item
1
2
Press [
Menu
] and then press the softkey below View
or, if View is not available on your display,
press [
Stored
]
Press selected [
Pers List
] or [
Grp List
] or [
Sys List
]
or Dial appropriate AD List code:
•
•
•
List 1
List 2
List 3
Note: An [
Enhcd List
] may also be available; see your
system manager.
3
4
Dial selected list item (1, 2, 3...)
Stored number shown
•
To return to normal display, press [
Exit
]
or begin again at Step 2 to see another stored
number
40