AT&T 8434 - Manual (Page 26)

To use the Consult
feature to talk privately
with a coworker after
answering a redirected
call
1
2
3
Press [ Transfer ]
• Call is put on hold
[dial tone]
Press [ Menu ] and then press the softkey below Cnslt
or, if Cnslt is not available on your display,
press [
Consult ] [priority ring to coworker]
or Dial coworker’s extension
Note: You can privately discuss call; if coworker is
not available, press the fluttering [
xxxxx ] to
reconnect to call.
Press [ Transfer ] again to send call to coworker
or Press [ Conf ] to make it a 3-party call
Call Forwarding All Calls
You can access this feature with the softkeys only if the feature’s abbreviation,
CFrwd, appears on the second line of one of the feature option screens.
To temporarily redirect
all calls to an extension
or outside number of your
choice
1
2
While on-hook or off-hook, press [ Menu ] and then
press the softkey below CFrwd
or, if CFrwd is not available on your display,
press [ Call Fwd ] (while on-hook or off-hook)
or Dial Call Forward access code
(while on-hook or off-hook)
[dial tone]
Note: If you have console permission, next, dial the
extension number whose calls are to be forwarded;
receive dial tone.
Dial extension or number where calls will be sent
[confirmation tone]
Note: Some voice terminals have restrictions on
where calls can be forwarded (see your system
manager).
Hang up
Note: You may hear a ring-ping tone from your
3
voice terminal as each call is forwarded.
21