AT&T 8434 - Manual (Page 30)

H o l d ✔
To put a call on hold
while you answer another
call, make a call, or
perform some other task
Note: The light beside
[
Shift ] must be off.
1 Press [ Hold ]
• Green light next to held call flutters
Note: If you put a conference call on hold, the other
parties remain connected.
To answer a new call
while active on another 1
2
Press [ Hold ]
• Green light next to held call flutters
Press [ xxxxx ] of incoming call
• You are connected to incoming call
To return to held call 1 Press [ xxxxx ] of held call
• You are connected to held call
Note: If you are active on a call and you press the
[
xxxxx ] of the held call, the active call will be
dropped.
Intercom (Automatic/Dial)
You can access these features with the softkeys only if the feature’s abbreviation,
IAuto (for Automatic Intercom) or IDial (for Dial Intercom), appears on the second
line of one of the feature option screens.
To make a call to your
predetermined Automatic
Intercom partner 1 While off-hook, press [ Menu ] and then press the
softkey below IAuto
or, if IAuto is not available on your display,
press [
IcomAuto xxx ] (while off-hook)
[ringback tone]
• Special intercom ring is sent
Note: If call is unanswered, press [ Go to Cvr ] while
call is ringing if you want to redirect it to coverage.
25