Fcav patterns, 7 fip patterns – Teledyne LeCroy SierraNet M168 User Manual Ver.1.50 User Manual
Page 102
Teledyne LeCroy
Trigger and Filter Settings in Easy Mode
100
SierraNet M168 User Manual
FCAE‐VI(SEND_RESP)
FCAE‐VI(WRITE_RESP)
FCAV Patterns
FCAV(Simple)
FCAV(Extended)
2.6.7
FIP Patterns
For any FIP pattern, double‐click the pattern name, for example, double‐click Discovery
Solicitation from ENode to open the dialog.
Note:
All the screen captures for the FIP patterns are similar to the screen capture shown below.
Figure 2.64: FIP Discovery Solicitation from ENode Pattern Dialog
Enter the values for the Ether header, FIP Header and the count of the expected number
of occurrences. Check the Check All box to select ports P1 through P8 or individually
select ports.
The following FIP patterns are available:
Discovery Solicitation from ENode
Discovery Solicitation from FCF
Discovery Advertisement
FIP FLOGI Request
FIP FLOGI LS_ACC
FIP FLOGI LS_RJT
FIP NPIV FDISC Request
FIP NPIV FDISC LS_ACC
FIP NPIV FDISC LS_RJT