Teledyne LeCroy SierraNet M168 User Manual Ver.1.50 User Manual
Page 206
![background image](/manuals/353534/206/background.png)
Teledyne LeCroy
InFusion Scenarios
204
SierraNet M168 Protocol Analyzer User Manual
Note:
You can specify Events, Combined Events and Actions and additional Events. The application
automatically checks for the maximum number of terms (Events/Actions). When you exceed
the limit, an error is flagged, prompting you to jump to the place that caused the error.
Note:
You can specify additional Sequences and States. The application automatically checks for the
maximum number of terms (sequences/states). When you exceed the limit, an error is flagged,
prompting you to jump to the place that caused the error.
VSAN‐FCVI(READ_RQST) Refer to section
VSAN‐FCVI(SEND_RESP) Refer to section
VSAN‐FCVI(WRITE_RESP) Refer to section
VSAN‐FCVI(READ_RESP) Refer to section
VSAN‐
FCVI(CONNECT_RQST)
Refer to section
VSAN‐
FCVI(DISCONNECT_RQST)
Refer to section
VSAN‐
FCVI(CONNECT_RESP1)
Refer to section
VSAN‐
FCVI(CONNECT_RESP2)
Refer to section
VSAN‐
FCVI(CONNECT_RESP3)
Refer to section
VSAN‐
FCVI(DISCONNECT_RESP)
Refer to section
FCAV
VSAN‐FCAV(Simple)
Refer to section
VSAN‐FCAV(Extended)
Refer to section
FIP
Refer to section
MPCP
Refer to section
Address Resolution
Protocol
Refer to section
“Address Resolution Protocol Pattern” on
Link Layer Discovery
Protocol
“Link Layer Discovery Protocol Pattern” on
Internet Protocol
Refer to section
“Internet Protocol Pattern” on page 103.
iSCSI
Refer to section
VLAN
Refer to section
ISL
Refer to section
CN‐Tag
Refer to section
“CN Tag Patterns” on page 108.
VN‐Tag
Refer to section
“VN Tag Patterns” on page 108.
Trill Frame
Refer to section
Protocol Errors
Refer to section
Event
Description