Teledyne LeCroy SierraNet M168 User Manual Ver.1.50 - Manual (Page 110)

Teledyne LeCroy Trigger and Filter Settings in Easy Mode
108 SierraNet M168 User Manual
Note: For all ISL patterns enter a value for the ISL Header.
2.6.15 CN Tag Patterns
All the CN Tag patterns are similar to FCoE patterns. Refer to “Ethernet Basic” on page 87 .
Note: For all CN Tag patterns enter a value for CN Tag.
2.6.16 VN Tag Patterns
All the VN Tag patterns are similar to FCoE patterns. Refer to “Ethernet Basic” on page 87 .
Note:
For all VN Tag patterns enter a value for VN Tag.
2.6.17 LLC
LLC-IEEE802.ID Frame
Double‐click LLC‐IEEE802.ID Frame to open the dialog.
Figure 2.71: LLC-IEEE802.ID Dialog
Enter the values for the Ethernet, LLC Header, Spanning Tree Header, GARP Header and
select an option from the DSAP and SSAP pull ‐down menus. Enter the count of the
expected number of occurrences. Check the Check All box to select ports P1 through P8
or individually select ports.