Teledyne LeCroy SierraNet M168 User Manual Ver.1.50 - Manual (Page 137)

SierraNet M168 User Manual 135
Advanced Mode (User‐Defined) Teledyne LeCroy
You can:
 Display the state definition
 Set Output Trigger level
 Select up to three timers
 Define the If condition and up to three Else If conditions
 Set number of occurrences before trigger
 Set captured data
 Set excluded data
 Go to next state
 Add state
 Choose link for Sequencer setup
Figure 2.87: State Programming Dialog
Add State
Click on the Add State button to add a State to the Sequencer. A State will be
added below the last State.