Teledyne LeCroy SierraNet M168 User Manual Ver.1.50 - Manual (Page 61)

SierraNet M168 User Manual 59
Trigger and Filter Settings in Easy Mode Teledyne LeCroy
Capture Everything
Checking this option captures everything on the bus and the Pattern Library is greyed out
(see figure below).
Figure 2.31: Filter Dialog
Filter in Selected Patterns
Checking this option includes the selected patterns in the trace capture (see Figure 2.31
on page 59 ).
Filter Out Selected Patterns
Checking this option excludes the selected patterns in the trace capture (see Figure 2.31
on page 59 ).
Always Filter Out
Check one or more option to exclude Idles and or P1 through P8 in the trace capture (see
Figure 2.31 on page 59 ).
Click the + icon to use
previously set triggers Click the x icon to delete
previously set triggers Click this
icon to Rename Current Trigger
Include and Exclude arrows
Capture
Everything
Filter In Selected
Patterns
Filter Out
Selected
Patterns
Always Filter
Out
Truncate
Payload
Auto Negotia-
tion
Include and Exclude arrows