Figure 3.22 on – Teledyne LeCroy SierraNet M168 User Manual Ver.1.50 User Manual
Page 161
![background image](/manuals/353534/161/background.png)
SierraNet M168 User Manual
159
Switching Views
Teledyne LeCroy
Figure 3.22: Data Payload Dialog
Any ASCII non‐printable characters are depicted as black dots as shown above.
Raw Data View - Frame Inspector View for 64b/66b Decoding
Raw Data View in the Frame Inspector View window shows the exact bit stream in 66b
format (see
). This view shows Hex, 10‐bit and Running Disparity
views of each dword in the selected packet. In this view, a 66 bits block is reconstructed
similar to the received data (see the screen capture below). The following columns are
displayed in the Raw Data View:
Index: This column demonstrates the index of the 66‐bits symbol in current
blocks.
Sync Header: This column shows the Sync Header bits of a symbol.
Payload: This column shows the 8 payload bytes in each symbol before scram‐
bling.
Scrambled: This column shows the 8 payload bytes in each symbol after scram‐
bling.