Stop analyzer – Teledyne LeCroy SierraNet M168 User Manual Ver.1.50 User Manual
Page 234
Advertising
![background image](/manuals/353534/234/background.png)
Teledyne LeCroy
Batch Scenario Overview
232
SierraNet M168 Protocol Analyzer User Manual
Stop Analyzer
Drag and drop the Stop Analyzer command to display the Stop Analyzer Properties dialog.
Figure 5.5:
Stop Analyzer Properties
Dialog
Select the Analyzer checkbox. If a delay is needed after the command is executed, check
the Delay checkbox and set the time in seconds.
Advertising