2 jam details, 3 scenario events – Teledyne LeCroy SierraNet M168 User Manual Ver.1.50 User Manual
Page 197
SierraNet M168 Protocol Analyzer User Manual
195
InFusion Scenarios
Teledyne LeCroy
The Global Rules and States are part of the new Scenario. Once the scenario is created,
right‐click on the New Scenario tab and select Rename to name it in the Project Library
panel. Click the Close icon to save it in the Library for later use. All the Scenarios that are
created are displayed in the Library panel.
Figure 4.5: Global Rules and States InFusion Scenario Manager
4.5.2
Jam Details
Jam Event: Set a Jam Event by dragging an Event to the Global Rules or Sequence
panel. The Events and their descriptions are listed in
Table 4.1 on page 196
.
Jam Action: Set a Jam Action
by dragging an Action to the Global Rules or
Sequence panel.
After the first Jam Action has been specified you can set a consequent Jam
Action by dragging more Actions to the Drag an Event here to add another con‐
dition area. The Jam Actions and their descriptions are listed in
Table 4.1 on
page 196
.
4.5.3
Scenario Events
Table
Table 4.1 on page 196
describes the Presets that can be used as FCoE Events. See
“Available Resources” on page 211
for details.
Note:
You can have multiple Events and Actions in Global Rules and in each State.