Teledyne LeCroy SierraNet M168 User Manual Ver.1.50 - Manual (Page 220)

Teledyne LeCroy InFusion Scenarios
218 SierraNet M168 Protocol Analyzer User Manual
4.5.10 Copy and Paste Scenarios
You can copy and paste scenarios from one project to another project. Perform the
following steps to do so:
1. Select the scenario you want to copy in either the scenario name tab and select
Copy or in the Library pane, right‐click and select Copy Scenario (see Figure 4.12 on
page 218 ).
Figure 4.12: Copy Scenario
2. Place the cursor in the area below <New Scenario> in the Library pane, in the
project you want to paste in, right‐ click and select Paste Scenario.
Figure 4.13: Paste Scenario