Teledyne LeCroy Sierra M6-4 SAS_SATA Protocol Analyzer User Manual - Manual (Page 103)

Sierra M6‐4 SAS/SATA Protocol Analyzer User Manual 101
SAS/SATA Software Menus and Toolbars Teledyne LeCroy
Soft Reset (SATA only)
Double‐click Soft Reset to open the Soft Reset dialog.
Figure 2.65: SATA: Soft Reset Dialog
SAS vs. SATA: Not available in SAS.
Sequential Trigger Mode
In the Sequential Trigger mode, triggering occurs whenever the system detects a specific
sequence of patterns. The order of the triggering patterns can be defined. You must
define at least two patterns to enable the selection of the sequential trigger mode.
Note: Primitives and Symbols or Frames occurring very close together on different ports cause false
triggers to occur.
To define a triggering sequence, select more than one pattern, then check the
Define Sequential Trigger Mode check box.
Figure 2.66: SAS: Select Sequential Trigger Mode
SAS vs. SATA: SATA Dialog has different patterns.