Teledyne LeCroy Sierra M6-4 SAS_SATA Protocol Analyzer User Manual - Manual (Page 381)

Sierra M6‐4 SAS/SATA Protocol Analyzer User Manual 377
Creating a Sequence Teledyne LeCroy
The Event Properties dialog box appears.
5. In the Event Properties dialog box, select Address Frame as the event.
6. Click OK to close the Event Properties dialog box.
7. In the State 0 area, click the prompt to add an action.
Figure 4.41: Example 7: Adding an Action for the First State
The Action Properties dialog box displays.
8. For the action, select Branch to > New State.
9. Click the OK button to close the Action Properties dialog box.
10. This saves the action and automatically creates an area for State 1 in the scenario.
11. In the State 1 area, click the prompt to add an event. The Event Properties dialog
box appears.
12. Choose the Address Frame event. In the Direction column, select From Target (you
want State 1 to trigger on an Identify Address frame received from the target).
13. Click OK to close the Event Properties dialog box.
14. Click the prompt to add an action for State 1.