Teledyne LeCroy Sierra M6-4 SAS_SATA Protocol Analyzer User Manual - Manual (Page 28)

Teledyne LeCroy Expandability
26 Sierra M6‐4 SAS/SATA Protocol Analyzer User Manual
Figure 1.12: Cascading Wrongly
5. Make a note of the last four digits of the MAC address of the unit designated as
Unit 1 and the last four digits of the other units, in order of connection.
Figure 1.13: Address Digits
Important! Power up all units before starting the software.
1.10.3 Select Device
After starting the software, click on Setup and select All Connected Devices (see
Figure 1.14 on page 27 ).
Incorrect way to connect:
The black color pin of the
ribbon wire is connected
in a different way between
the 2 connectors.
Cascading works incorrectly
in this case, the boxes are
connected but no traces
are captured.
Black color pin
of ribbon wire