Teledyne LeCroy Sierra M6-4 SAS_SATA Protocol Analyzer User Manual - Manual (Page 43)

Sierra M6‐4 SAS/SATA Protocol Analyzer User Manual 41
Teledyne LeCroy SAS/SATA Protocol Suite Menu Options and Toolbars Teledyne LeCroy
Figure 1.26: File Menu Option
1.22.2 Setup
For special work, you can use the Setup menu (see Figure 1.27 on page 42 ) to perform the
following actions:
 TxRxVout & Pre‐emphasis (see “TxRx Vout & Preemphasis” on page 303 )
 User Defined Decoding (see “User‐Defined Decoding” on page 317 )
 External Trig Setting (see “External Trig Setting” on page 314 )
 Update Device (see “Update Device” on page 315 )
 All Connected Devices (see “Select Device” on page 26 )
 Find DUT (see “Find DUT” on page 328 )
 Power Source Control (see “Power Source Control” on page 330 )
 Manage Setup Licences (see “Floating License” on page 313 )
 Preferences (see “Preferences” on page 304 )
 Self Test (see “Self Test” on page 320 )
 Data Block (see “Data Blocks” on page 138 )
 Set Port Alias (see “Set Port Alias” on page 301 )
 Set SAS Address Alias (see “SAS Address Alias (SAS only)” on page 302 )