Teledyne LeCroy Sierra M6-4 SAS_SATA Protocol Analyzer User Manual - Manual (Page 307)

Sierra M6‐4 SAS/SATA Protocol Analyzer User Manual 303
TxRx Vout & Preemphasis Teledyne LeCroy
Figure 3.128: SAS: SAS Address Alias
If you elect to save the captured sample file, the assigned SAS address names are saved
together with the result, so that when you open the sample file later, the assigned names
are retained.
Set As Default
If you want to set these SAS address aliases for sample files that will be captured later, you
can set them as default, and new samples will be opened by these default SAS address
aliases.
3.17 TxRx Vout & Preemphasis
The analyzer incorporates the ability to select TxRx Vout for the transmitter on each port.
Selecting TxRx Vout increases the output voltage swing above the nominal value, for test
and characterization purposes. This feature is also useful to compensate for line loss
when driving long cables.
To select TxRx Vout, select Setup > TxRx Vout & Preemphasis to display the 
Rx/Tx Settings dialog (see
Figure 3.129 on page 304 ):