Teledyne LeCroy Sierra M6-4 SAS_SATA Protocol Analyzer User Manual - Manual (Page 76)

Teledyne LeCroy SAS/SATA Software Menus and Toolbars
74 Sierra M6‐4 SAS/SATA Protocol Analyzer User Manual
2.2.26 SSP Frame (SAS only)
Double‐click SSP Frame to open the SSP Frame Pattern dialog.
Figure 2.25: SSP Frame Type Dialog
SAS vs. SATA: Not available in SATA.
Click the down arrow next to the SSP Frame Type list box and choose an SSP Frame type.
2.2.27 FIS (Frame Information Structure) (SATA only)
Double‐click FIS (Frame Information Structure) to open the FIS Type selection dialog.
Figure 2.26: SATA: FIS Types Dialog
SAS vs. SATA: Not available in SAS.
Click the down arrow next to the Type drop‐down list box, choose a FIS type to capture,
and click OK. Repeat for additional types.