Teledyne LeCroy Sierra M6-4 SAS_SATA Protocol Analyzer User Manual User Manual
Page 194
Teledyne LeCroy
Target and Device Emulation
192
Sierra M6‐4 SAS/SATA Protocol Analyzer User Manual
0b, 1103 (aborted command, MULTIPLE READ ERRORS)
0b, 4b06 (aborted command, INITIATOR RESPONSE TIMEOUT)
04, 4100 (hardware errors, DATA PATH FAILURE)
Figure 2.185: Sense Key Codes
4. Set up Outgoing and Incoming frame errors.
Note:
Once you check the Generate Error On: check box for a command, a red status indication
appears next to the command, indicating an error condition.
Outgoing Frame Settings
Before selecting Outgoing Frame Settings, select the Types Of Frames and the
Frame Number on which to inject an error. Then check Outgoing Frame in the Generate
Error On area and then the enabled Settings button to display the Outgoing Frame
Setting dialog (see
).