Teledyne LeCroy Sierra SAS_SATA Protocol Analyzer STX API Reference Manual - Manual (Page 355)

Sierra SAS/SATA Protocol Suite, STX Software API Reference Manual
ISerialSCSICaptureProject 355
SetTriggerSequentialMode
long SetTriggerSequentialMode (
BOOL bIsSequentialMode,
BOOL bIsForceRemoved);
Inputs
BOOL bIsSequentialMode
TRUE for Trigger to be sequential. Otherwise, FALSE.
BOOL bIsForceRemoved
TRUE for Trigger patterns to remove when you want to change
Trigger mode from sequential to nonsequential mode.
Otherwise, FALSE.
Return Value
Saves the Error Code if an error occurs.
Remark
Sets Trigger patterns to sequential mode with force flag, to remove over patterns from engine
when you toggle from sequential to non sequential mode.
NOTE: This method is only for easy mode.
See Also
IsTriggerSequentialMode