Teledyne LeCroy Sierra SAS_SATA Protocol Analyzer STX API Reference Manual - Manual (Page 579)

Sierra SAS/SATA Protocol Suite, STX Software API Reference Manual
IExerciserEngine 579
GetCloseSequenseType
int GetCloseSequenseType (
short iLayerID,
int nPacketIndexInLayer,
BYTE* pyCloseSequenseType);
Inputs
short iLayerID
Layer ID of a packet (see SASLayerEnum )
int nPacketIndexInLayer Index of a packet corresponding to layer ID.
BYTE* pyCloseSequenseType Type of close sequence in close connection setting
(see CloseSequenseTypeEnum ).
Return Value
Returns result of method, whether called by valid index and layer ID or not.
Remark
Returns type of close connection setting in close connection setting for a command:
close normally, without done, or break connection.
It is useful for changing close connection setting for a command.
See Also
SetCloseSequenseType