Teledyne LeCroy Sierra SAS_SATA Protocol Analyzer STX API Reference Manual - Manual (Page 849)

Sierra SAS/SATA Protocol Suite, STX Software API Reference Manual
ISearchInfo 849
Properties
Properties Name Properties Description
OnlyPacketsWithPE Boolean that specifies to search just on packet
with PE.
OnlyPacketsWithoutPE Boolean that specifies to search just on packet
without PE.
Channel Searches or removes search on channel attribute
that is a BYTE:
Bit0: I1
Bit1: T1
Bit2: I2
Bit3: T2
Bit4: I3
Bit5: T3
Bit6: I4
Bit7: T4
ProtocolError Searches or removes search on protocol error:
Bit0: OOB Sequence Error
Bit1: Code Violation Error
Bit2: Disparity Error
Bit3: Align Error
Bit4: Signaling Latency Error
Bit5: Unexpected Primitive Error
Bit6: Primitive Response Timeout Error
Bit7: Frame Type Error
Bit8: Frame Length Error
Bit9: Frame Direction Error
Bit10: CRC Error
Bit11: ACK/NAK Timeout Error
DataLength Searches or removes search in payload data
frame with a length.
LogicOperator Defines searching data pattern And /Or
DataLength property.