Erinjcmngethardresetcounterafterphyready, Erinjcmnsetdonotcheckcredit – Teledyne LeCroy Sierra SAS_SATA Protocol Analyzer STX API Reference Manual User Manual
Page 742
Sierra SAS/SATA Protocol Suite, STX Software API Reference Manual
ITargetEmulEngine 742
ErInjCmnGetHardResetCounterAfterPHYReady
Void ErInjCmnGetHardResetCounterAfterPHYReady (
BOOL* pbEnable,
BYTE* pyHardResetCounter);
Inputs
BOOL* pbEnable
Specifies whether to enable Hard Reset Counter After PHY
Ready.
BYTE* pyHardResetCounter Counter value for hard Reset.
Return Value
None.
Remark
In general section of error injection, gets enability and timer value of Hard Reset Counter After
PHY Ready.
See Also
ErInjCmnSetHardResetCounterAfterPHYReady
ErInjCmnSetDonotCheckCredit
Void ErInjCmnSetDonotCheckCredit (
BOOL bEnable,
int* pnRetVal);
Inputs
BOOL bEnable
Specifies whether to enable removing check Credit.
Int* pnRetVal
Error code. If the function call was corrected, the error code is zero.
Return Value
None.
Remark
In general section of error injection, sets ability of not checking credit.
See Also