Teledyne LeCroy Sierra SAS_SATA Protocol Analyzer STX API Reference Manual - Manual (Page 731)

Sierra SAS/SATA Protocol Suite, STX Software API Reference Manual
ITargetEmulEngine 731
ErInjSetSendDelayToSendHandshake
ErInjSetSendDelayToSendHandshake (
short iLayerId,
int nCommand,
BOOL bEnable,
short iDelayValue,
int* pnRetVal);
Inputs
short iLayerId
Layer ID of a packet (see SASLayerEnum )
int nCommand
Command type corresponding to layer ID.
(see SCSICommandsEnum , SMPFrameFunctionsEnum ,
CommandTypeEnum , SSPTaskManagmentEnum )
BOOL bEnable
Specifies whether delay to sending handshake for a frame feature is
selected or not.
short iDelayValue
Delay value to sending handshake for a frame feature.
int* pnRetVal
Result of method, whether called by valid index and
layer ID or not or other errors.
Return Value
None.
Remark
Sets delay to sending handshake is selected or not and delay time in sending handshake for an
incoming frame of a command.
NOTE: Call this method only for the SCSI, SMP, Task, or ATA command packet and transport
packet.
See Also
ErInjGetSendDelayToSendHandshake