Erinjcmngetlinkresettimerafterlinkenable, Erinjcmnsethardresetcounterafterphyready – Teledyne LeCroy Sierra SAS_SATA Protocol Analyzer STX API Reference Manual User Manual
Page 741
Sierra SAS/SATA Protocol Suite, STX Software API Reference Manual
ITargetEmulEngine 741
ErInjCmnGetLinkResetTimerAfterLinkEnable
Void ErInjCmnGetLinkResetTimerAfterLinkEnable (
BOOL* pbEnable,
int* pnTimerValue);
Inputs
BOOL* pbEnable
Specifies whether to enable Link Reset After Link Enable.
Int* pnTimerValue
Timer value for Link Reset After Link Enable.
Return Value
None.
Remark
In general section of error injection, gets enability and timer value of Link Reset After Link
Enable.
See Also
ErInjCmnSetLinkResetTimerAfterLinkEnable
ErInjCmnSetHardResetCounterAfterPHYReady
Void ErInjCmnSetHardResetCounterAfterPHYReady (
BOOL bEnable,
BYTE yHardResetCounter);
Inputs
BOOL bEnable
Specifies whether to enable Hard Reset Counter After PHY
Ready.
BYTE yHardResetCounter
Counter value for hard Reset.
Return Value
None.
Remark
In general section of error injection, sets enability and timer value of Hard Reset Counter After
PHY Ready.
See Also
ErInjCmnGetHardResetCounterAfterPHYReady