Agilent Technologies Wireless Network Optimization Platform E6474A User Manual
Page 102
Advertising
102
Agilent E6474A User’s Guide
4
Use Your System
5 Select the Log Mode button (
Figure 79
).
Figure 79
Log Mode button
At this point all device connections are checked and then
measurement data will be collected and added to the current
project.
When you wish to stop data collection, select the stop
button. The drive test data is displayed as a drive data set
within the project (
Figure 80
).
Figure 80
Drive data in project
Select Log Mode button
Drive data in project
Advertising