Agilent Technologies Wireless Network Optimization Platform E6474A - Manual (Page 48)

48 Agilent E6474A User’s Guide
3 Set Up Your System
Figure 22 Timing calibration connections
3 Connect the GPS antenna to the timing module (ANT
SMB).
4 Connect a fully charge battery, with the booster module
fitted, to the timing module. A fully charge battery lasts
approximately 16 hours.
5 Start the GPSMon software. Refer to Figure 23 on
page 49.
PUSH
100
75
50
25
Li-ION
ANT
1 PPS
RS-232
10 MHz
GPSMon software
Timing Module
Fully charge battery
GPS antenna
At least four satellites
(optional mains AC)