Agilent Technologies Wireless Network Optimization Platform E6474A - Manual (Page 65)

Use Your System 4
Agilent E6474A User’s Guide 65
Introduction - Starting the application
When you first open the E6474A, the following screen
appears (
Figure 32 ).
Figure 32 Welcome screen
Creating a new project
Before you add hardware and configure your test
environment, you can open the application in project mode
and create a project. A project contains all your
configuration information and drive test results. A project is
created using the project manager.
Once you have selected the project manager the project
mode is automatically enabled.
Select this button to view an
animated demonstration of the
application
Choose a project type and select
this button to open and view a
typical example project
Select this button to start
the application