Agilent Technologies Wireless Network Optimization Platform E6474A - Manual (Page 145)

Connection Panels and LED Indicators B
Agilent E6474A User’s Guide 145
Fei-Zypher Timing Module
Figure 111 Fei-Zypher Timing Module
Table 5 Fei-Zypher Timing Module descriptions (see Figure 111 )
ANT
1 PPS
CONTROL
10 MHz
Connector Name Cable Part Number Opposite End of Cable Connects To
ANT GPS antenna
1PPS Connects to the 1PPS port on the W1314A receiver and provides
timing and measurement synchronization.
RS-232 Used for controlling the timing module. Not used by the Agilent
E6474A system.
10 MHz Provides a 10 MHz signal output. Note used by the Agilent
E6474A system
Power Input (not shown
above) Agilent battery modules