Agilent Technologies Wireless Network Optimization Platform E6474A - Manual (Page 37)

Set Up Your System 3
Agilent E6474A User’s Guide 37
Figure 16 Connecting more than one receiver to your laptop
Pulse trigger E645xC receivers
The E645xC receivers accommodate a pulse trigger device.
The triggering device requirements are:
• Cable with BNC male connector (the Agilent pulse trigger
cable input is female BNC)
• Falling- edge trigger
• TTL threshold
• 15 volt maximum pulse level
• 100 nanosecond minimum pulse width of period
• 300 microsecond minimum pulse