Agilent Technologies Wireless Network Optimization Platform E6474A - Manual (Page 71)

Use Your System 4
Agilent E6474A User’s Guide 71
Adding Hardware
Hardware can be added to a project even if the device is not
available or not connected to your laptop. This is useful if
you have a limited number of test devices or you need to
configure projects remotely from your test area.
Adding hardware (Manually - no devices connected to your
laptop)
Follow this procedure:
1 In the hardware panel, right- click on hardware.
( Figure 40 )
Figure 40 Hardware panel
NOTE
Hardware does NOT need to be connected to your system for it to be
added to the hardware list. This lets you configure a project without the
need for you to have all the hardware.
Right-click here