Agilent Technologies Wireless Network Optimization Platform E6474A - Manual (Page 79)

Use Your System 4
Agilent E6474A User’s Guide 79
configured are pre- selector bands, channels to be used
and measurement types to be made.
Figure 50 Properties of added measurement
As each measurement is added to the receiver in the
hardware list, the data items are updated with new items
that can be used on views. A receiver does not need to be
connected to your system for measurements to be added.
Tour of Data Items
Once hardware has been added to your project (manually or
automatically), data items are added to the data items
system panel. Data items are used to build views.
Properties of the measurement
Added measurement
NOTE
All data items and measurements are shown. However, only licensed
measurements will display measurement data in your views.