ZOLL AutoPulse Rev D Users Guide - Manual (Page 59)

P/N 11440-001 Rev. 3 Page 3-21
User Guide
3.8.1 Information Upload Procedure
1. Turn on your PC (the host computer).
2. Start the Code Review software.
Figure 3-18 Main Menu
3. Power up the AutoPulse and when the initialization is complete press the Menu/Mode Switch button
and then select the “Enter Comm. Mode” option from the Main Menu. Alternatively you may enter
directly into the Communication Mode by depressing the Menu/Mode Switch button as you power
up the platform.
Figure 3-19 Infrared Communication Set-up
3 0 : 2
MENU
E n t e r C o m m M o d e
V i e w L a s t P a t i e n t I n f o
V i e w P l a t f o r m I n f o
V i e w B a t t e r y I n f o
e x i t
Computer Infrared
Communication Adapter
AutoPulse Platform
Infrared Communication Port