ZOLL AutoPulse Rev D Users Guide User Manual
Page 66
Page 4-4
P/N 11440-001 Rev. 3
User Guide
Inspect the Battery in accordance with the inspection checklist provided below. Follow the recommended
actions as appropriate. The Battery is automatically checked each time the device is powered on.
1.
Inspect the Battery Pack, including the connector for physical damage that would preclude its
insertion in either the platform or the charger. Contact ZOLL as needed.
2.
Inspect the pack enclosure for cracks that would expose the internal volume of the battery. Discard
and replace battery.
3.
Place the Battery in the Battery Charger where a self-test will be performed during the battery
charging cycle.
Inspect the Battery Charger in accordance with the inspection checklist provided below. Follow the
recommended actions as appropriate.
1.
Inspect the Battery Charger for physical damage. Contact ZOLL as needed.
2.
Inspect the battery compartments for foreign substances, be sure they are free and clear for battery
insertion. Remove any foreign matter or debris.
If the product malfunctions or fails any of these inspections, contact ZOLL at +1.800.348.9011 or
+1.978.421.9655.