C.1.2 anti-static precautions, C.1.3 product disposal – IEI Integration PPC-37xxA-N26 v1.10 User Manual
Page 191
PPC-37xxA-N26 Panel PC
Page 175
C.1.2 Anti-static Precautions
WARNING:
Failure to take ESD precautions during the installation of the EP series
may result in permanent damage to the EP series and severe injury to
the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the EP series. Dry climates are especially susceptible to ESD. It is therefore
critical that whenever the EP series is opened and any of the electrical components are
handled, the following anti-static precautions are strictly adhered to.
Wear an anti-static wristband: Wearing a simple anti-static wristband can
help to prevent ESD from damaging any electrical component.
Self-grounding: Before handling any electrical component, touch any
grounded conducting material. During the time the electrical component is
handled, frequently touch any conducting materials that are connected to the
ground.
Use an anti-static pad: When configuring or working with an electrical
component, place it on an antic-static pad. This reduces the possibility of ESD
damage.
Only handle the edges of the electrical component: When handling the
electrical component, hold the electrical component by its edges.
C.1.3 Product Disposal
CAUTION:
Risk of explosion if battery is replaced by and incorrect type. Only certified
engineers should replace the on-board battery.
Dispose of used batteries according to instructions and local regulations.