Figure 3-20: optical drive blank plate assembly, Figure 3-21: optical drive screws – IEI Integration PPC-37xxA-N26 v1.10 User Manual
Page 50
Advertising
PPC-37xxA-N26 Panel PC
Page 34
Step 3:
Remove the four screws from the optical drive bracket assembly (Figure 3-20).
Remove the blank drive plate.
Figure 3-20: Optical Drive Blank Plate Assembly
Step 4:
Install the optical drive in the same position as the previously removed blank
optical drive plate. Fasten the same four screws to attach the optical drive to the
bracket.
Figure 3-21: Optical Drive Screws
Step 5:
Attach the SATA cable to the back of the optical drive.
Advertising