3 preinstalled components, 4 installation and configuration steps, Reinstalled – IEI Integration PPC-37xxA-N26 v1.10 User Manual
Page 36: Omponents, Nstallation and, Onfiguration, Teps
PPC-37xxA-N26 Panel PC
Page 20
Anti-static Discharge: If a user open the rear panel of the panel PC, to
configure the jumpers or plug in added peripheral devices, ground themselves
first and wear and anti-static wristband.
3.3 Preinstalled Components
The following components are all preinstalled.
Motherboard
DDR3 memory module
TFT
LCD
Touchscreen
Preinstalled OEM customizations may include the following.
HDD
Wi-Fi
module
Optical disk drive (PPC-3712A-N26 only)
3.4 Installation and Configuration Steps
The following installation steps must be followed.
Step 1:
Unpack the PPC-37xxA-N26.
Step 2:
Set the jumper settings (not usually necessary).
Step 3:
Install the mSATA SSD, HDD and optical disk drive.
Step 4:
Mount the PPC-37xxA-N26 panel PC.
Step 5:
Connect peripheral devices to the bottom panel of the PPC-37xxA-N26.
Step 6:
Configure the system.
Step 0: