IEI Integration PPC-37xxA-N26 v1.10 - Manual (Page 52)

PPC-37xxA-N26 Panel PC
Page 36
3.10 Mounting the System
WARNING!
When mounting the PPC-37xxA-N26 panel PC, it is advisable to have
more than one person help with the installation to prevent accidental
damage to the panel and avoid personal injury.
The methods of mounting the PPC-37xxA-N26 are:
ƒ Wall mounting
ƒ Panel mounting
ƒ Arm mounting
ƒ Stand mounting
ƒ Rack mounting
The mounting methods are described in the following sections.
3.10.1 Wall Mounting
To mount the PPC-37xxA-N26 panel PC onto a wall, please follow the steps below.
Step 1: Select the location on the wall for the wall-mounting bracket.
Step 2: Carefully mark the locations of the four bracket screw holes on the wall.
Step 3: Drill four pilot holes at the marked locations on the wall for the bracket retention
screws.
Step 4: Align the wall-mounting bracket screw holes with the pilot holes.
Step 5: Secure the mounting bracket to the wall by inserting the retention screws into
the four pilot holes and tightening them (Figure 3-24).