IEI Integration PPC-37xxA-N26 v1.10 - Manual (Page 48)

PPC-37xxA-N26 Panel PC
Page 32
Figure 3-17: PPC-3710A-N26 HDD Retention Screws
Step 4: Install the hard drive bracket (with hard drive and SATA cable attached) into the
panel PC and fasten the four hard drive bracket screws. Step 0:
Figure 3-18: Replacing the PPC-3710A-N26 HDD Bracket
3.8.3 PPC-3712A-N26 HDD Installation
To install the HDD into the PPC-3712A-N26, please follow the steps below:
Step 1: Remove the back cover . See Section 3.5.
Step 2: Remove the optical drive bracket . Undo the optical drive bracket screws and
remove the optical drive bracket. See Figure 3-19.