1 access the jumpers, 2 preconfigured jumpers, Table 3-1: jumpers – IEI Integration PPC-37xxA-N26 v1.10 User Manual
Page 39: Table 3-2: preconfigured jumpers, Table 3-3: lvds voltage selection jumper settings
PPC-37xxA-N26 Panel PC
Page 23
Description
Label
Type
AT/ATX power selection
JP3
2-pin header
Clear CMOS
JP1
3-pin header
mSATA/PCIe Mini mode selection
MSATA_SW1
2-pin header
Table 3-1: Jumpers
3.6.1 Access the Jumpers
To access the jumpers, remove the back cover. To remove the back cover, please refer to
Section
7
WARNING:
Do not change the settings on the jumpers described here. Doing so
may disable or damage the system
The following jumpers are preconfigured for the PPC-37xxA-N26. Users should not
change these jumpers.
Jumper Name
Label
Type
LVDS voltage selection
JP5
3-pin header
Touchscreen type selection
J_WIRE1
Switch
Table 3-2: Preconfigured Jumpers
Setting
Description
Short 1-2
+3.3V LVDS (Default)
Short 2-3
+5V LVDS
Table 3-3: LVDS Voltage Selection Jumper Settings